Mobile Coding Software

• Software Installation
  • Android Systems
  • iOS Systems
• Interface Guide
  • Login Interface
  • Bluetooth Window
  • Settings Interface
  • Remote Control Interface
  • Remote Control Settings Interface
  • Console Interface
  • **Beginner Version **
  • Advanced Version
• Block Command Instructions
  • Junior edition
    • Yellow (Trigger Category)
      • When Program Starts
      • When Gyroscope Sensor ()
      • When Gesture Sensor Detects ()
      • When Encoder Sensor ()
      • When Sound Sensor Detectes ()
      • When Distance Sensor Detects ()
      • When Button () is Pressed
    • Blue (Motor Category)
      • Set Motor Speed to ()
      • Motor () Rotates Clockwise
      • Motor () Rotates Counterclockwise
      • Motor () Stops Rotating
      • Move Forward
      • Move Backward
      • Turn Left
      • Turn Right
      • Stop
    • Purple (Lighting Category)
      • Set Touch LED Sensor to Color ()
    • Orange (Control Category)
      • Wait () Seconds
      • Repeat () Times
      • Repeat Continuously
  • Advanced edition
    • Control
      • Wait for ( ) second / millisecond
      • Loop
      • Repeat ( ) times
      • if ( ) then ( )
      • if ( ) then ( ) else ( )
      • Exit loop
      • Exit the program
    • Motor
      • Read the angle of the servo motor on port ( ).
      • Run the servo motor on port ( ) at speed ( ) in ( ) direction.
      • Run the servo motor on port ( ) at speed ( ) in ( ) direction for ( ) (revolutions/degrees/seconds).
      • Set the current position of the servo motor on port ( ) to zero.
      • Run the servo motor on port ( ) at speed ( ) to ( ) degrees.
      • Stop the servo motor on port ( ).
    • Motion
      • Set the running motor to ( ) and ( ).
      • Move ( ) running at ( ).
      • Move ( ) running at ( ) for ( ) (rotation/degree/second).
      • Stop the motor on ( ).
    • Sensor
      • Port ( ) compare distance to ( ).
      • Port ( ) compare Sound to ( ).
      • Port（）Encoder（）
      • Port（）Gyroscope Sensor（）
      • Port（）Gesture Sensor（）
      • Button ( ) on main controller is pressed.
      • Button ( ) on remote control is pressed.
      • Port（）Axis（）
      • Port（）Encoder
      • Port（）Distance
      • Port（）Sound
    • Light
      • Touch LED Module Port（）is（）
      • Indicator Position（）is（）
    • Operator
      • （）+（）
      • （）-（）
      • （）*（）
      • （）/（）
      • （）>（）
      • （）<（）
      • （）=（）
      • （）and（）
      • （）or（）
      • not（）
      • Generate a random number between ( ) and ( )
    • Variable
      • Create a variable.
      • Assign（）to（）
      • Change / Increase () by ()
      • Variable name
• User Guide
  • Required Permissions
  • Connecting Devices
    • Connection Steps:
  • Creating a Project
  • Online Mode (Beginner Version)
  • Offline Mode (Advanced Version):
  • Renaming the Bluetooth Device